- Purpose
Configures the client identifier lists to be associated with a DOCSIS Set-top Gateway (DSG) tunnel.
- Default Access Level
13
- Command Syntax
configure cable dsg client-id-list <0-4294967295> [index <0-4294967295>] [type {broadcast | mac-address | ca-system-id | application-id} [value <VALUE>]] [vsp-list <0-4294967295>] [no]
- Supplemental Information
The parameters for value change depending upon the type. This command may be entered multiple times to add multiple client IDs in the same list.
To remove a client ID list or entry from the client ID list, use the no option.
Parameters
- <0-4294967295>
Unsigned integer which is the Client ID List Identifier.
- index <0-4294967295>
Index for the given client identifier list. Valid numbers are any unsigned integer values.
- type
The type of client ID. Valid values are broadcast, mac-address, ca-system-id, and application-id.
- type broadcast value <VALUE>
If type is set to broadcast, then the following values have special meaning:
1 - Contains SCTE-65 [SCTE-65] — Delivery as defined in Annex D.
2 - Contains SCTE-18 [SCTE-18] — Delivery as defined in Annex D.
3 - Contains OCAP Object Carousel [OC-SP-OCAP1.0].
4 - Contains OpenCable Common Download Carousel [OC-SP-CD-IF].
For all other type values, this is the DSG client type.
- type mac-address value <H.H.H>
The cable modem MAC address for the DSG client list.
- type ca-system-id value <0-65535> or <0x0-0xFFFF>
The Conditional Access system identifier for the DSG client list, in decimal or hexadecimal.
- type application-id value <0-65535>
The application identifier for the DSG client list.
- vsp-list <0-4294967295>
The vendor-specific parameters (VSP) list identifier.