← Back to Articles
Complete Narrowcast RxD configuration
Last Updated: July 07, 2026
  1. Select one or more RxDs to associate with this service group by checking the checkbox next to the RPD(s). If the list of RxDs is too large to sort through, you can search for the relevant RxD name or location by using the Search field.
    NOTE: Ensure that the selected RxD is not selected in another Narrowcast service group that is assigned to a different streaming zone. An RxD device can only belong to Narrowcast service groups assigned to the same streaming zone.
  2. To configure the input Ethernet interface from which to receive content for an RxD, select the checkbox next to the RxD and click All RF Ports, ENET 0.
  3. If the type is rpd 1x1, rpd 1x2, rmd 1x1, or rmd 1x2, then the service group has one downstream RF port. Click the Ethernet Interface to select a different interface. If the type is rpd 2x2 or rmd 2x2, the service group has two downstream RF ports. You can select different Ethernet interfaces for both the RF ports.
    NOTE: By default, the RF ports are enabled and the Ethernet interface index is 0 for all RF ports.
  4. Click OK.
  5. Click Next.