← Back to Articles
Complete Downstream OOB "TS Only" identity
Last Updated: July 07, 2026
  1. Optional: Click the Mute Service Group checkbox to suppress network traffic until you have your configuration ready.
  2. Enter the Default SG IP for this service.
  3. Enter a UDP Port for this service.
    Important: This UDP Port is for non-DEPI use only.
  4. Enter a TS ID for the transport stream being created by this service group.
  5. Optional: Select a TS Template from the dialog. The annex mode of the TS template must align with the annex mode of the selected channel template.

    Transport Stream templates must be pre-defined. Refer to Transport Stream template overview for more information.

  6. Optional: Select a VUE from the pull-down.

    The default Aux Core is selected by default.

  7. Optional: Select a VUE Server by clicking on the field and selecting from the displayed list.
  8. Optional: Select an Input Interface from the pull-down.
  9. Optional: Select an Output Interface from the pull-down.
  10. Click Next.
Proceed to Create a Channel Plan.