The following fields are defined in ACCP configurations and are used with all of its associated RXDs.
- Aux Core Name
- The GCP auxiliary core name used by the VUE ACCP when an RXD registers with the VUE ACCP. The string can be a maximum length of 64 characters.
- Aux Core ID
- The Auxiliary Core ID is a unique ID used by the VUE ACCP when an RXD registers with the ACCP. This is a 6-byte hexadecimal string, maximum length of 12 characters.
- VUE Server
- The VUE Server managed by the VTM which is running this ACCP.
- GCP IP Address
- The IP address that the ACCP uses to communicate with the RXDs for all GCP traffic. The string value can be an IPv4 address in dotted decimal format or an IPv6 address as 8 groups of four hexadecimal digits separated by colons (IPv6 addresses may be collapsed). The string can be a maximum length of 45 characters.
- GCP Keep Alive Interval (Optional)
- The interval, in seconds, between GCP Keep Alive messages sent from the ACCP to the RXD. The value is an integer from 1 to 10. The default is 5 seconds.
- GCP Keep Alive Timeout (Optional)
- The maximum amount of time, in seconds, the ACCP will wait for a Keep Alive response message from an RXD before declaring that the connection is lost. The value is an integer from 3 to 305. The GCP Keep Alive Timeout must be longer than the GCP Keep Alive Interval. The default is 125 seconds.
- Max GCP Idle Timeout (Optional)
- The maximum amount of time, in seconds, an RXD remains idle to receive any GCP messages from the VUE Aux Core before declaring that the GCP connection is lost. When this timeout value is exceeded, the RXD attempts to reconnect to the VUE Aux Core for up to ~8 minutes at which time the RXD will drop its current configuration. The value is an integer from 0, 3 to 300. Setting the value to 0, disables connection monitoring on the RXD but continues to respond to Keep Alive Requests from the VUE Aux Core. The Max GCP Idle Timeout must be greater than or equal to a value at least three times the value of the GCP Keep Alive Interval. The default is 120 seconds.
- GCP Reconnect Timeout (Optional)
- The maximum amount of time, in seconds, the RXD will wait for the reconnection process to complete before declaring the reconnect attempt has failed. The value is an integer from 5 to 120. The default is 30 seconds.
- GCP Recover Action Delay (Optional)
- The delay, in seconds, the RXD will wait before or while performing the recovery action for the GCP session. The value is an integer from 0 to 600. The default is 30 seconds.
- GCP Recover Action Retry (Optional)
- The number of recover actions the RXD will attempt when a GCP session is lost. The value is an integer from 1 to 255. The default is 16 retries.
- Stat Polling Interval (Optional)
- The interval, in seconds, between Polling requests from the ACCP to its RXDs. The value is an integer from 5 to 900. The default is 60 seconds.
- Stat Poll (Optional)
- Enable or disables the ACCPs polling operation to the RXDs for status and statistics. The default is enabled.