Complete Narrowcast "Channels & TS" identity
Last Updated:
July 07, 2026
- Optional: Select a Streaming Zone. If you don't select any streaming zone, the default streaming zone will be applied to this service group.
- Optional: Enter a Null PID B/W (bps) value to allot bandwith for the insertion of null packets in the transport stream for RMD devices.
- Optional: Click the Mute Service Group checkbox to suppress network traffic until you have your configuration ready.
- Enter the Default SG IP for this service.
- Enter a UDP Port for this
service.Important: This UDP Port is for non-DEPI use only.
- Select a Channel Template from the
dialog.Channel templates must be pre-defined. For more information, refer to Channel template overview.
- Enter a Starting TS ID for the transport stream being created by this service group.
- Optional: Check the SSM box if this a Single Source Multicast.
- Select a TS Template from the dialog.
The annex mode of the TS template must align with the annex mode of the selected channel
template.
Transport Stream templates must be pre-defined. Refer to Transport Stream template overview for more information.
- If you have selected a TS template created using the RPCsession creation method, enter a RPC Service Group.
- If you have selected a TS template created using the RTSPsession creation method, enter a RTSP Group Name.
- Optional: Select a VUE from the pull-down.The default Aux Core is selected by default.
- Optional: Select a VUE Server from the dialog.
- Optional: Select an Input Interface from the pull-down.
- Optional: Select a PID Interface from the pull-down.
- Optional: Select a VIP from the pull-down.
- Optional: Select an Output Interface from the pull-down.
- Optional: If you have selected a template created using the RTSPsession method in the TS Template field, select the LSM checkbox to configure Linear Source Management.
- If you check the LSM checkbox, enter the LSM Multicast IP and LSM UDP Port numbers.
- Click Next.