Parameter Name | Description |
|---|---|
omAlarmAlertStatus | Set to 'warning' when the EAS condition is activated |
omAlarmCtrlLinkError | Alarm that occurs when the TCP connection with the control host is not established or is lost |
omAlarmDuplicateInputUdpPortNumber | Status count specifying the number of duplicate UDP port numbers encountered |
omAlarmInvalidMcastTtlSetting | Status count specifying whether or not the Multicast Time to Live setting is valid |
omAlarmInvalidRecMcastIpAddress | Status count specifying the number of Receive Multicast IP addresses that are not in the required range |
omAlarmMuxPacketsDroppedError | Set to 'major' when packets on the aggregate input to the multiplexer are dropped, as specified by the threshold criteria located in the omPacketStatsTable |
omAlarmPllError | Alarm that occurs when the Phase Locked Loop becomes unlocked |
omAlarmRfOutError | Alarm that occurs when the modulator RF output level is not within expected limits |
omAlarmRFOutputPacketsDroppedError | Set to 'major' when packets on the RF output port exceed those specified by the threshold criteria located in the omPacketStatsTable |
omControlHostIPaddress | IP Address of the OM 1000 control host |
omControlHostPortNumber | TCP Port number of the OM 1000 control host |
omEmerPidToBlockFour | The fourth emergency broadcast PID to block |
omEmerPidToBlockOne | The first emergency broadcast PID to block |
omEmerPidToBlockTwo | The second emergency broadcast PID to block |
omEmerPidToBlockThree | The third emergency broadcast PID to block |
omEmerPort | The emergency broadcast logical port |
omSysConfCntrlHostName | The host name of the controlling device |
omSysConfCntrlService | The destination TCP port for the control channel |
omSysConfIgmpEnable | The IGMP enable/disable parameter |
omSysConfMcastTimeToLive | The UDP datagram Time To Live (TTL) value for a transmitted multicast |
omSysStatusEmerAlert | Returns the current state of OM 1000's rear panel EMR ALRT terminals (open/closed) |
omSysStatusExtSync | The state of the modulator external symbol sync |
omSysStatusFaultSumm | The current state of FAULT SUMM status LED on the OM 1000 front panel |
omSysStatusPLL | The state of the modulator Phase Locked Loop |
omSysStatusRfOut | The state of the modulator RF output |
← Back to Articles