← Back to Articles
Add a VEDS Data Plane Interface
Last Updated: July 02, 2026
  1. Select Elements > VEDS in the navigation bar.
  2. Select the VEDS to which a data plane interface needs to be added.
  3. Click the (Menu) button.
    The menu options appear.
  4. Select Add Interface.
    The Add Additional Data Plane Interface screen appears.
  5. Enter the following information in the Add New Data Interface section at the bottom of the screen:
    1. Select an IP from the Input Data Plane Interface pull-down.
    2. Enter an Input Port for this interface.
    3. Enter a Bandwidth percentage for this interface.
    4. Enter the Edge Group Name for this interface.
    5. Click Add.
    6. Repeat for additional interfaces if necessary.
  6. Click Save.