AlarmAppNetEnetFail

Alarm that occurs when the Application Server Ethernet card initialization fails

alarmDemodBandwidthNearCapacityCondition

Trap that is issued when the NC 1500 detects the upstream bandwidth is approaching capacity on a demodulator

alarmDemodBandwidthNearCapacityEvent

Trap that is issued when the NC 1500 detects the upstream bandwidth is approaching capacity on a demodulator

alarmDemodFailCondition

This alarm is set at the first demodulator failure event and is cleared at the last demodulator recover event

AlarmDemodFailEvent

This alarm occurs when a demodulator fails

AlarmDiskLoadError

Alarm that occurs when loading set-top information from disk fails

alarmDownstreamFailCondition

This alarm is set at the first downstream failure event and is cleared at the last downstream recover event

alarmDownstreamFailEvent

This alarm occurs when a downstream path fails

alarmExcessiveDroppedRPDFramesCondition

This trap is issued when the NC 1500 has detected an overload condition resulting in excessive dropped

RPD 1000/2000 frames for a period of time

alarmExcessiveDroppedRPDFramesEvent

This trap is issued when the NC 1500 has detected an overload condition resulting in excessive dropped

RPD 1000/2000 frames for a period of time

alarmExcessiveUpstreamRetriesCondition

This trap is issued for each upstream when the number of retries has exceeded the user-defined percentage

alarmExcessiveUpstreamRetriesEvent

This trap is issued for each upstream when the number of retries has exceeded the user-defined percentage

alarmMasterFail

Is active when any alarm appears

alarmMultipathDetected

This trap is issued when the NC 1500 suspects crosstalk exists between two or more upstream paths

alarmNoAppMsgQueue

Alarm that occurs when a downstream task could not find the application message queue

alarmNoMacMsgQueue

Alarm that occurs when a downstream task could not find the MAC message queue

alarmNoOobQForPath

Alarm that occurs when downstream interface service has no downstream path ID associated with it

alarmNoServiceFreq

Alarm that occurs when a downstream path ID has no service channel frequency associated with it

alarmRpdChassisFailCondition

This alarm is set at the first RPD 1000/2000 chassis failure event and is cleared at the last RPD 1000/2000 chassis recover event

alarmSendToFail

Alarm that occurs when a sendto call in the downstream interface failed

larmSettopCreateFail

Alarm that occurs when an attempt to create a set-top class instance failed

alarmSettopDatabaseFull

Alarm that occurs when a set-top database table is full

alarmSettopDatabaseThresholdReached

This trap is issued when the set-top database reached the user-defined threshold

alarmSocketBindFail

Alarm that occurs when a downstream task failed to bind

alarmUpstreamFailCondition

This alarm is set at the first upstream path failure event and is cleared at the last upstream path recover event

alarmUpstreamFailEvent

This alarm occurs when an upstream path fails

ncAckTimeout

AckTimeout expressed in milliseconds for a 10 second timeout duration

ncAutoRecoveryFlag

Writing to this object enables or disables the Auto-recovery feature

ncBackgroundPathTestEnable

Writing to this object enables or disables the Path Test logic

ncBackgroundPurgeEnable

Writing to this object enables or disables the background purging of questionable set-tops from the set-top database

ncBackgroundQuestionSettop

Writing checkActive enables passive checking for questionable set-tops

ncBackoffMax

This parameter specifies the largest upper limit for the exponent in the ALOHA backoff algorithm

ncBackoffOffset

This parameter specifies an offset which is added to the exponent in the ALOHA backoff algorithm

ncBackoffTimeUnit

Specifies the time unit used in the ALOHA backoff algorithm

ncCellAbortCount

ncContChannelMsgRate

Sets the rate in seconds of the Contention Channel List Message

ncDacDataServiceName

DAC 6000 service name corresponding to the UDP port on DAC 6000 which receives data from NC 1500

ncDacHostIP

Purchase poll reportback Destination IP Address

ncDacHostName

DAC 6000 host name

ncDacIpAddress

DAC 6000 IP address

ncDACServiceNumber

Purchase poll reportback destination port number

ncDateAndTime

Current date/time

ncDefaultConfigMsgRate

Sets the rate in seconds of the Default Configuration Message

ncDMBandwidthThreshold

The percentage of nominal capacity (50 cells/sec) measured over a period of one minute that will cause an alarm to be generated if the threshold is exceeded

ncDNSDomainName

Domain name

ncDNSServerIP

IP Address of DNS server

ncIdleInterval

Rate (in milliseconds) at which the terminal should send MAC Idle messages when it has nothing else to send

ncInitTimeout

The amount of time (in seconds) the terminal will wait for a MAC Sign On Request or a MAC Logical Address message before restarting initialization

ncMacAbortCount

The number of consecutive times ncCellAbortCount may be reached before declaring the MAC layer unavailable

ncMaximumPowerLevel

Maximum transmit power level of a terminal

ncMinimumPowerLevel

Minimum transmit power level of a terminal

ncNetworkEntryDelay

When set, it indicates the period to delay entry to the network

ncOmChassisStatus

The OM 1000 chassis status

ncPathTestMasterAlarm

The Master Alarm set by Path Test results

ncPathTestNumberOfPathPairs

Number of configured upstream paths

ncPowerIncrement

The amount the terminal should increase the power by when it reaches PowerRetryCount

ncPowerRetryCount

Specifies the number of times the terminal should try to enter the network at a certain power level before automatically changing power levels

ncPurgeSettop

Clears the NC 1500's set-top database

ncRPDFramesDropCountPeriod

The length of time over which the number of

RPD 1000/2000 dropped frames should be measured

ncRPDFramesDropThreshold

The number of RPD 1000/2000 dropped frames per minute that will trigger an alarm

ncSettopQuestionable

The number of questionable set-tops

ncSettopStartIp

The start of the range of IP addresses that the NC 1500 is allowed to assign to terminals

ncSettopTotal

The total number of set-tops

ncUpstreamRetryThreshold

The percentage of cells received in one minute on a particular upstream path that required at least one retry to get through