← Back to Articles
Complete Broadcast Transport Streams
Last Updated: July 07, 2026
  1. Select the Transport Stream(s) as necessary and modify the values as needed:
    • Frequency: Provided during Channel(s) selection.
    • TSID:

      Provided by the value entered as the default TSID specified during Identity creation.

      Transport Streams in a Broadcast Service Group having an AutoMap Service Catalog Entry assigned can have its TSID overridden by unchecking the Reuse Input PAT TSID checkbox (see below). This allows a specific TSID value to be entered as long as it does not conflict with a pre-existing Transport Stream's TSID.

    • Reuse Input PAT TSID:

      This selection enables or disables the use of the default TSID value for each Transport Stream in the Service Group. It is only available for Transport Streams in a Broadcast Service Group having an AutoMap Service Catalog Entry assigned. When available, it is enabled by default.

      When enabled, the Output Transport Stream is configured to inform the VUE to use the TSID value from the input/source MPTS.

      When disabled, the Output Transport Stream is configured to inform the VUE to use the TSID value assigned by the operator in the VTM.

    • TS Template: Provided during Identity creation. You can select a TS template with a different annex mode than other frequencies to support mixed annex mode.
    • VUE: Selected during Identity creation.
    • VUE Server: Selected during Identity creation.
    • Input Interface: Must be entered now if needed.
    • PID Interface: Must be entered now if needed.
    • Output Interface: Must be entered now if needed.
    • Service Catalog Entry: This selection determines the type of mapping done within the VUE for this service. Refer to Service catalogs for more information.
  2. Click Next.
  3. Review the PIDs for this transport stream. If a PID change is necessary, double-click the PID to reconfigure it.
    Add Broadcast Service Group - PIDs screen
  4. Click Next.

    If you selected the Channels & TS Created Entities, the RPDs screen will appear. Continue to Complete RxD configuration.

    If you selected TS Only Created Entities, the Review screen will appear. Continue to Review service group configuration.