← Back to Articles
Complete Broadcast "Channels & TS" identity
Last Updated: July 07, 2026
  1. Optional: Enter a Null PID B/W (bps) value to allot bandwith for the insertion of null packets in the transport stream for RMD devices.
  2. Optional: Click the Mute Service Group checkbox to suppress network traffic until you have your configuration ready.
  3. Enter the Default SG IP for this service.
  4. Enter a UDP Port for this service.
    Important: This UDP Port is for non-DEPI use only.
  5. Select a Channel Template from the pull-down.
    Channel templates must be pre-defined. For more information, refer to Channel template overview.
  6. Enter a Starting TS ID for the transport stream being created by this service group.
  7. Optional: Check the SSM box if this a Single Source Multicast.
  8. Select a TS Template from the pull-down. The annex mode of the TS template must align with the annex mode of the selected channel template.

    Transport Stream templates must be pre-defined. Refer to Transport Stream template overview for more information.

  9. Optional: Select a VUE from the pull-down.
    The default Aux Core is selected by default.
  10. Optional: Select a VUE Server from the pull-down.
  11. Optional: Select an Input Interface from the pull-down.
  12. Optional: Select a PID Interface from the pull-down.
  13. Optional: Select an Output Interface.
  14. Click Next.
Proceed to Create a Channel Plan.