Each RxD associated with the VTM consists of the following pieces of information.
Identity tab
| Field | Description |
|---|---|
| Name | A name assigned to the RxD for unique identification. |
| MAC Address | Device MAC address. |
| VUE | The VUE assigned to this RxD. |
| Assigned Auxiliary Core | The VUE currently configured as the auxiliary core for this RxD. |
| Role | Device type for the network element. Values are: RPD or RMD. |
| Type | The configuration type of the RxD in terms of number of downstream and upstream ports. The following types are available for the RPD:
The following types are available for the RMD:
|
| Operational Mode | The operational modes for an RxD. The default operational mode for an RPD is Synchronous and for an RMD is Asynchronous. |
| Vendor | The equipment vendor. |
| Serial Number | Device serial number. |
| Location | Name given to the RxD's physical location or node in which the RxD exists. |
| Geolocation | The longitude and latitude of the RxD's physical location. |
| Description | A string used to identify the RxD. |
Service Groups tab
| Field | Description |
|---|---|
| Name | Name for the Service Group. |
| Type | Service Group type; Broadcast, Narrowcast, Downstream OOB, or Upstream OOB. |
| Adzone | Generally pre-defined and apply to a geographical area to which particular ad distributions apply. |
| Location | Name given to the Service Group's physical location or node in which the RxD exists. |
| Channel Count | Number of channels associated with the Service Group. |
Channels tab
| Field | Description |
|---|---|
| Name | Name for the Channel. |
| Type | Channel type. |
| Service Group | Service Group to which the Channel is assigned. |
| Frequency | Frequency the Channel uses. |
| Provisioning Status | Current provisioning status of Channel. |
| State | Current Channel state. |
| ID | Channel ID. |
| RF Port Index | RF Port index number assigned to this RxD. |
| Multicast IP | Downstream destination Multicast IP address. |
| UEPI Destination IP | IP address for destination Upstream External PHY Interface for this RxD. |
| RF Channel Index | RF Channel index number assigned to this RxD. |
| Admin State | Administrative status of the channels for this RxD; Up or Down. |
| RF Mute | Whether RF signals are muted on this RxD; True or False. |
| TS ID | Transport stream ID for this RxD. |
| Session ID | Session ID assigned by the RxD. |
| Annex | Annex in the RxD profile; A, B, or C. |
| Modulation | The modulation type assigned to the channel:
|
| Interleaver Depth | Level of interleaver depth on the associated channel. |
| Symbol Rate Override | Sets the symbol rate for the video channel. |
| Spectrum Inversion Enabled | Status of spectrum inversion on the associated channel. Values are true or false. |
| Power Adjust | Power adjust setting on the associated channel. |
| VARPD Source ID | Virtual ARPD Source ID used by the service group to which this channel is assigned. |
| VARPD RF Port | Virtual ARPD RF Port used by the service group to which this channel is assigned. |
| VARPD Demod | Virtual ARPD Demodulator ID used by the service group to which this channel is assigned. |
Status tab
| Field | Description |
|---|---|
| MAC Address | MAC address of the RxD. |
| State | The reported state for the RxD as seen by the ACCP
(aux core). The supported values are:
|
| Channel Status | Description |
|---|---|
| Frequency | The frequency of this RF channel. |
| State | The reported state for the channel as seen by the ACCP (aux core). The
supported values are:
|
| Session ID | The DEPI or UEPI session id for this channel. |
| Out of Sequence Packets | The count of session packets that were received out of sequence from the point of view of the RxD. |
| Out Packets | Reports the number of outbound MPEG packets successfully transmitted on the channel. |
| Out Errors | The number of packets that could not be transmitted. |
| IF Out Discards | Reports the number of outbound MPEG packets which were internally discarded before transmission, for example, due to lack of buffering. |
| IF Out Errors | Reports the number of outbound MPEG packets that could not be transmitted because of errors. |
